Detcon Alarm Station
SmartWireless® audio-visual alarm station.
Detcon SmartWireless® audio-visual alarm stations feature a battery powered audio visual alarm station designed as a wireless cordless system. They are cost-effective and easy to deploy, making them viable for permanent and temporary installations.
Key Benefits
- No disruption of network ensuring continuity of operations.
- Long operating times facilitate logistics.
- Configurable combinations of visual and audible alarms allow for concomitant use for more than one type of gas.
Detcon wireless H2S detection sensor
SmartWireless® hydrogen sulfide gas detection sensor.
Access the technical specifications for the Detcon wireless H2S detection sensor. These gas detection sensors are designed for use in heavy industrial environments, in both permanent and temporary installation.
Key Benefits
- Capable of operating for long periods of time without replacement.
- Robust network that automatically routes around congestion and line-of-sight obstacles.
- A single device is capable of detecting a long list of gases, depending on requirements.
Detcon Site Sentinel CXT Controller
SmartWireless® alarm and control system.
The Detcon Site Sentinel CXT Controller provides real time information on gas concentrations, the status of other field devices, battery charge levels, network RF signal quality and any number of fault diagnostic conditions affecting either an individual field device or the entire network.
It is ideal for applications in oil and gas drilling rigs, production sites, and refining and petrochemical plants.
Key Benefits
- Flexible and expandable.
- Long operating time facilitate logistics.
- Controllers have centralized visibility on all the information about the network
WindSock
Designed to indicate wind direction and relative wind speed.
Air Blower
The Air Blower is designed to keep your site clear from accumulation of hazardous gases and vapors.
MultiRAE Lite
The MultiRAE is a highly versatile and customizable wireless monitor, capable of detecting one-to-six gases.
VRAE
The VRAE is a powerful, pumped, one to five gas monitor that protects workers from combustible gases and vapors, toxic gases and oxygen deficiency/enrichment. This versatile instrument can measure concentrations of combustibles either as percentage by volume or as percentage of lower explosive limit (LEL).
Ventis MX4
The Ventis MX4 is a portable multi-gas monitor that takes your gas detection program to the next level. Offered as a diffusion monitor, it detects and measures gas(es) present in open space. It can also work in confined space locations with the aspirated monitor.
MiniRAE
The MiniRAE 3000 is the most advanced handheld Volatile Organic Compound (VOC) monitor on the market. Its photoionization detector’s (PID) extended range of 0 to 15,000 ppm makes it an ideal instrument for applications from industrial hygiene to leak detection and HazMat.
iTX-4
The iTX multi-gas detector is the industry’s most versatile portable gas detection instrument. Designed to grow with you as your monitoring needs change, the iTX can go from being a single gas unit to a six-gas monitor with just a few simple user configurations and sensor changes.
Impact pro
The Impact Pro gas detector is safe, small, lightweight, battery-powered and rugged – ideal for areas where there is a risk of exposure to toxic or flammable gases.
Calibration Kit
Cost effective calibration and bump test management
This impact-resistant calibration kit ensures trouble-free transportation and increased safety.
Key Benefits
- The calibration kit helps to improve the measurement performance of the gas monitor instruments.
- Reduce measurement errors and improve consistency between measurements.
MGC Pump
This Multi Gas Clip (MGC) Pump is a hardworking, hand held portable gas detection meter.
MeshGuard
The battery-operated wireless MeshGuard gas detection monitor is a key building block of the MeshGuard intelligent network of connected sensors for gas detection in industrial safety applications.
Colorimetric Gas Detection Pump and Tubes
RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors.
Key Benefits
- More accurate than other comparable multigas tube-style detectors (+ /- 12.5% error instead of +/- 25% error potential in most other pumps).
- Extended ranges allow the safety hand to match the tube range to the current concentration more effectively.
- Wide variety of tubes for different gases, with extended ranges available within each tube.
- Simple and robust – no rubber baffles to leak.